Zymöl Shop | Washing Products | Cleaning Products | Feeding Products | Kits | Accessories | Premium Products

Directions for Use:

1. Wash and dry the car using zymol Clear Auto Bathe.
2. HD-Cleanse the surface to assure 100% wax bonding.
3. Using the zymol Wax Applicator, apply a very small amount of wax onto a 2ft x 2ft surface in an even coat with side-to-side motions.
4. Using a zymol Microwipe, with light pressure, slowly wipe the wax in the opposite direction once, assuming a uniform coverage. Wait for 20 - 30 seconds. With medium pressure, slowly rub the surface to set.
5. Turn your Microwipe and, and crystallise the wax to a deep shine. Let the wax cure for 30 - 45 minutes.

Note: zymol wax is designed to provide maximum results with minimum product application. Apply very small amounts of zymol wax for each application.

Caution: Do not allow any zymöl wax to entirely dry before wiping. You may apply several coats.

Creame Starter Kit

The perfect way to start the full zymol system for light coloured cars

HD-Cleanse

Removes light oxidation and moderate scratches

Pre Wax Applicators

Essential for the HD-Cleanse application

Clear - Autobathe

A unique combination of pure Tallow, Coconut Esssence Oil conditioners and Lemon extract to clean and care for your car

Sponge

The right sponge makes a big job easy

Wax Applicators

This no-silicone foam wax applicator pad is your assurance of an even coat of Zymöl Hand-Crafted Paste Wax, every time.